Home
Downloads
Community
Submit
Marketplace

SCPH-50001 Ps2 GH-026 Date Code 3D Chipped

System Mods, Hard Mods and Soft Mods - Discuss them here.

SCPH-50001 Ps2 GH-026 Date Code 3D Chipped

Postby HaloSlayer255 » Mon Oct 16, 2017 11:48 pm

Hello all,

Modchipped another ps2 console. In my link for my signature under modbo 5.0 install is the folder "SCPH 50001 Version 10 Date Code 3D GH-026 White Wire One side" As my latest install, I have a replacement station (same as before) and also as a heads up Radio Shack doesn't have replacement heating elements for this particular station.

This console boots all media but now the pesky tray refuses to eject. Had to pop the little magnetic holder to test reading. Also the capacitor is missing on the modbo 5.0 in the pictures, its swapped with another modbo 5.0 chip.

Has anyone troubleshooted tray issues before, the laser will go to the center but not all the way back to the top if I have the tray assembly installed. Without the tray assembly it works like it should the laser assembly moves up and everything.

Thanks in advance,
HaloSlayer255
  • 0

User avatar
HaloSlayer255 4
 
Posts: 373
Joined: Wed Oct 17, 2012 7:19 pm
Custom Title: Corvette Lover
Reputation: 937

Re: SCPH-50001 Ps2 GH-026 Date Code 3D Chipped

Postby Jonny7810 » Thu Oct 19, 2017 4:54 pm

I have a feeling it's the tray that's at fault. Have you tried removing the tray and replacing it with another one? v9s and v10s both have a tray that you can remove by slightly pushing the white cog to the right then pulling it out.
  • 0

My consoles,v20.17:

Crystal 1.4 w/ iND-BIOS 5004,256KB ST TSOP,80GB WD800BB IDE,Phillips DVD-ROM,UnleashX
Xbox v1.0 w/ EvoX M8+ F&G,1MB TSOP,80GB Seagate ST3802110A IDE,Samsung SDG-605B DVD-ROM,XBMC
PS2 SCPH-50003 w/ Modbo 4.0 1.99
PS2 SCPH-50003 - silver, stock
PS2 SCPH-30004R w/ Ripper v2
PS2 SCPH-90004a - stock
PS2 SCPH-70004a - FMCB 1,93
PS2 SCPH-77007a - stock


Computers:
Main rig - Gigabyte GA-MA770-US3,AMD Athlon II X4 Processor 2.6GHz,4GB DDR2,Radeon R7 240 2GB,1TB Samsung HD103SI,H-L DVD drive,Windows 7 Ultimate x64
User avatar
Jonny7810 3
 
Posts: 184
Joined: Sat Aug 24, 2013 3:30 am
Custom Title: Now look at this NET
Reputation: 140

Re: SCPH-50001 Ps2 GH-026 Date Code 3D Chipped

Postby HaloSlayer255 » Sat Nov 04, 2017 3:14 pm

Sorry this reply is late Jonny7810,

I do have a few of the v9 and v10 consoles that I can switch out and test. Will try that later maybe tomorrow. Strange thing though is the tray ejected completely before I modchipped this console.

Thanks for the reply and sorry for my delay,
HaloSlayer255
  • 0

User avatar
HaloSlayer255 4
 
Posts: 373
Joined: Wed Oct 17, 2012 7:19 pm
Custom Title: Corvette Lover
Reputation: 937

Re: SCPH-50001 Ps2 GH-026 Date Code 3D Chipped

Postby ZX81v2 » Sat Nov 04, 2017 3:21 pm

Or the "Cogs" could have dirt n grime on the spindles, maybe hair.. This would cause friction and cause the tray to not shut correctly. Also make sure the runners are greased still. Could have dried out over the years in some points..

I don't have any v9's or v10's so I can't check
  • 0

PS2 (Phat) + Network Adapter + SATA Bridge + 2TB HDD = Insanity+1 !
Wanna Know More > theisozone.com/forum/viewtopic.php?f=75&t=49420&hilit=+sata

FreeMCBoot Installer - OPL 0.8/9 + HDL0.8c
Game Compatibility Checker. WinHIIP User
ZX81v2's MAME/ARCADE Thread Here
FreeMCBoot Install Service "UK" Thread HERE
MY PS2 OPL 0.8 HDD Game Compatibility List Click Here 100% Safe

Latest MESS/MAME Roms : Retroroms.info < NEW SITE !

ImageImageImageImage

If you are/WERE a PS2 Developer please check PS2Home out !
Designed & (C)2013-2017 by ZX81v2
User avatar
ZX81v2 Moderator
 
Posts: 7559
Joined: Sat Feb 04, 2012 6:02 pm
Location: EARTH - SOL System - Mostly Harmless
Custom Title: R Tape Loading Err0r
Reputation: 42912


Return to System Modding



Who is online

Users browsing this forum: No registered users and 5 guests



Home | Legal Notice | DMCA Policy | DMCA File Removal Center | Contact